waveshare 1.28inch Round Touch LCD Display Module 240×240 Resolution 65K RGB LCD for Raspberry Pi,Raspberry Pi Pico,Arduino, STM32,Embedded GC9A01 Driver, CST816S Capacitive Touch Control Chip

1.28inch Round LCD Display Module With Touch Panel, 240×240 Resolution, IPS, SPI And I2C Communication

Features
1.28inch Touch LCD Display Module
Embedded GC9A01 Driver And CST816S Capacitive Touch Control Chip.Using SPI And I2C Communication Respectively
Comes with examples for Raspberry Pi, Raspberry Pi Pico, Arduino, STM32, etc.

2.Small Size, Touch More Possibilities
Suitable For Various Smart Devices Development, Can Realize Human-Computer
Interaction Function

3.Control Interfaces
For Use With Controller Boards Like Raspberry Pi / Raspberry Pi Pico / Arduino / STM32

Specifications
OPERATING VOLTAGE—3.3V / 5V
DISPLAY DRIVER—GC9A01
TOUCH DRIVER—CST816S
DISPLAY PANEL—IPS
DISPLAY SIZE—Φ32.4mm
MODULE SIZE—39.89 × 38.50mm Φ38.50mm
RESOLUTION—240 × 240 pixels
DISPLAY INTERFACE—4-wire SPI
TOUCH INTERFACE—I2C
TOUCH TYPE—Capacitive
PIXEL SIZE—0.135 × 0.135 mm

LCD and Controller
This LCD adopts built-in driver GC9A01 with a resolution of 240RGB × 240 dots, which has an internal GRAM of 129,600 bytes. It supports MCU port with
12/16/18 data bus, that is, the common RGB format of RGB444, RGB565, and RGB666.

For most LCD controllers, the communication mode of the controller can be configured, usually with an 8080 parallel interface, three-wire SPI, four-wire SPI,
and other communication methods. This LCD uses a four-wire SPI communication interface, which can greatly save GPIO ports, and the
communication speed will be faster.

Package Content
1.28inch Touch LCD x1
GH1.25 13Pin cable x1

Note
Development Resources are provided , please contact us to get .