Price: $13.45
(as of Feb 06, 2024 21:28:11 UTC – Details)
Overview
1.14inch LCD Display Module for Raspberry Pi Pico, 65K RGB Colors, 240×135 pixels, SPI Interface.
Embedded ST7789 driver, using SPI bus
Features 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
SPI interface, requires minimal IO pins
1x joystick and 2x user buttons for easy interacting
Specifications
Operating voltage: 2.6~5.5V
Resolution: 240×135 pixels
Communication interface: 4-wire SPI
Display size: 24.91 x 14.86mm
Display panel: IPS
Pixel size: 0.1101 x 0.1035mm
Driver: ST7789
Dimensions 52.00 x 25.00mm
LCD and the controller
The ST7789VW is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source line and 320 gate line driving circuits. The resolution of this LCD is 135(H)RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn’t use all the RAM of the controller. This LCD accepts 8-bits/9-bits/16-bits/18-bits parallel interface, that are RGB444, RGB565, RGB666. The color format used in demo codes is RGB565. This LCD uses a 4-line SPI interface for reducing GPIO and fast speed.LCD
Comes with Raspberry Pi Pico C/C++ and MicroPython Demo.
Package Content
Pico-LCD-1.14 x1
1x joystick and 2x user buttons for easy interacting
Operating voltage: 2.6~5.5V. Resolution: 240×135 pixels. Communication interface: 4-wire SPI.
Display size: 24.91 x 14.86mm. Display panel: IPS. Pixel size: 0.1101 x 0.1035mm. Dimensions 52.00 x 25.00mm.
