Price: $26.99
(as of Jan 16, 2024 09:15:06 UTC – Details)
Product Description
MAIWO Dual Bay USB 3.0 to 2.5 inch SATA Hard Drive RAID Enclosure
Super Speed
This Dual Bay SATA HDD/SSD Adapter equips with JMS561 chip and USB 3.0 interface.Maximum transmission speed can reach 6Gbps when using device with Windows 8.1 and above operating system and UASP USB Protocol.
Large Capacity
Support simultaneous reading and writing of two 6TB 2.5 inch SATA hard drives.Maximum capacity expansion of 12TB.
User Friendly
Tool-free installation / Support hot swapping / Plug and play / Built-in sponge cushion, stable and shockproof.
Auto Sleep
Energy Saving Design. If there is no data activity within 10 minutes, this enclosure enters smart sleeping mode automatically.
LED Indicator
Blue LED lights up when it is connected to power supply. Blue LED blinks when read and write.
Additional power is required when using this enclosure, a USB3.0 Type-A to Micro USB power cable will come with this enclosure.
Max 6Gbps Transfer Speed
This dual bay hdd raid enclosure for 2.5″ SATA hard drive equips with JMS561 chip and USB 3.0 port, the transfer speed can reach 6Gbps when using device with Windows 8.1 and above operating system and with UASP USB protocol.
Dual Bay Up to 12TB Capacity
The Dual bay hard drive raid storage case supports 6TB expansion for each bay, max 12TB capacity in total.
10 mins Auto-Sleep
Automatically enter sleep-mode if no used for 10 minutes.
4 RAID Modes
RAID 0: Merge all HDD’s capacity in the HDD enclosure and upgrade it’s performance (reading and writting speed).RAID 1: Two HDD’s in the HDD enclosure can backup each other, cannot upgrade it’s performance (reading and writing speed), and it can support self restoration function (RAID 0 modes cannot support this function), which makes files can be restored when mistaks and faults occur.LARGE: Merge all HDD’s capacity in the HDD enclosure to make it easy to manage but can not upgrade it’s performance.Normal: Means normal state, all HDDs in the HDD enclosure work independently without forming any RAID modes.
MAIWO K25272 Hard Drive Enclosure Installation Steps
Remove the middle frame of the hard drive enclosure, install 2.5-inch hard disks at 45 degrees to the HDD1/HDD2 separately, fix the hard disks with screws, Put the installed hard disk middle frame back into the hard drive enclosure and fix the middle frame with screws.After setting the function mode, connect the K25272 dual-disc hard drive enclosure data cable to the computer end interface, connect the power supply at the same time, press and hold the RESET button, turn on the power switch, wait 5-8 seconds, the RAID indicator lights up and let go, at this time USB driver will be installed automatically in the lower right corner of the desktopNote: If you are connecting to a new hard disk, right click on the computer desktop “Computer” – “Management” – “Disk Management” – find the corresponding disk first “Initialize Disk”, then “New Simple Volume”. See the user manual for details on RAID usage.
【Compatibility】This Dual Bay USB 3.0 to 2.5 inch SATA Drive RAID Enclosure supports 2.5 inch 7mm 9.5mm SATA HDD and SSD. 【NOTE: additional power is required when using this enclosure, a USB3.0 Type-A to Micro USB power cable will come with this enclosure】
【USB 3.0 Interface 6Gbps】The 2.5 inch SATA SSD HDD RAID Enclosure 2 Bay equips with JMS561 chip and USB 3.0 port, the transfer speed can reach 6Gbps when using device with Windows 8.1 and above operating system and UASP USB Protocol.
【4 RAID Mode】Support 4 Raid Mode: NORMAL (PM) / RAID 0 (FAST) / RAID 1 (Mirror/SAFE) / LARGE (Large Capacity), with this 2 bay 2.5’’ HDD SSD raid enclosure you can easily switch disks by raid mode switch.
【12TB Capacity】Each bay supports 6TB expansion, Max 12TB Capacity in total.
【Performance】10mins Auto Sleep / Tool Free Installation / Hot Swapping / Plug and Play / Independent Power Cable
