Price: $19.99 - $16.99
(as of Apr 11,2023 03:08:07 UTC – Details)
Product Description
Compatible with all M.2 NVMe and SATA SSD based enclosure adapter
Package Included
1 x M.2 NVME SATA to USB 3.1 Type-C SSD Enclosure
1 x USB C to USB C Gen2 Cable (10Gbps)
1 x USB A to USB C Cable (10Gbps)
2 x Thermal Pad
1 x Screw Set : 2 screws (1*Scew A and 1*Screw B)
Notice：Insert your NVMe or SATA SSD into the enclosure and connect to your laptop’s USB-C or Thunderbolt 3 port to transfer movies, music, and more at speeds of up to 10 Gbps.
The actual speed depends on the speed of your SSD, USB Port type, your computer performance etc, nvme ssd is not included.
SSK Type C M.2 NVMe SATA（NGFF） Tool-Free SSD Enclosure (Bouble Protocol SSD)
M.2 NVMe PCIE /SATA（NGFF）SSD Based
SSK M.2 NVME SATA SSD Enclosure adopts high performance controller Chipset RTL9210B, with high-speed data transmission speeds up to 10Gbps . 1GB file only takes1 second ;
Attention: It supports PCI-E based M key / (B&M) key M.2 NVME SSD read/write speed up to 10Gbps; SATA-based B&M Key M.2 SSD read/write speed up to 5bps. Not compatible with B Key Connectors. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
Tool-Free,No tool required
Interface type: M.2 NVME and SATA to USB 3.1 Gen 2
Support SSD Drivers Size: 2242, 2260, 2280mm
Cable 1 : USB C to USB C(150MM)
Cable 2 : USB3.0 AM to USB C(150MM)
Color: Silver Grey
M.2 NVME PCIe M key & M.2 SATA (NGFF) B&M key Enclosure Adapter
Only compatible with NVME and sata M Key and B+M connectors
Not compatible with B Key Connectors.
Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
Attention: NVMe and SATA SSDs are not included.
If youdon’t know which type is your SSD and you have any questions, please contact SSK Direct before purchasing.
Main Features
Easy Installation & Extreme Data Transfer
Plug and play, no driver required. With USB 3.1 Gen2 interface,provides transfer speeds of up to 1000MB/s,1GB file1 second. Backward compatible with USB 2.0 and USB 1.1.
2* Thermal Pads included for Excellent Heat Dissipation
Everything you need in one package, included 2* thermal pads, you can paste one thermal pad or two side by side to achieve rapid heat dissipation.
Attention: Due to the nvme SSD extreme transmission speed, the temperature is higher than USB3.0 HDD, we tested ours is around 50 °C in writing and below 40 °C in reading, even after a long time R/W, the speed will not drop down or device will not shut down.
Fashion Design
Adopts aluminum alloy shell, Slim design, durable and excellent heat dissipation, be portable and easy to carry.It will be the best choice for trip and business travel.
Main Features
Tool-free design and fastest USB storage speeds!
Tool-free design and no additional tools required. With two cables, USB A to C and USB C to C which suitable for all Host PC ports.
Supports Plug & Play and Hot-Swapping.
M.2 NVMe and SATA SSD Compatibility
Compatible with M.2 NVMe and SATA NGFF SSDs
Not compatible with B Key Connectors. M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs
NVMe SSDs use exceptionally high performance storage media that will run hot when under load.
The rubber SSD retention peg can be moved to support multiple M.2 NVMe SATA NGFF SSD lengths including: 2280, 2260, 2242.
Multi OS Compatible
Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones.Blue Indicator is always on when plug in, and flash when read or write data.
Installation Instructions
1. Ｐlease slid to open and take the middel frame out of the enclosure.
2. Place the SSD at and angle of 45 degress into the PCB.
3. Insert the fixing hole at the end of the M.2 SSD into the slot in the middle of screw B, insert screw A and tighten it. Otherwise, there will be large screws preventing the installation of the enclosure.
4. Put the thermal pad on the SSD,leave the sheet on the thermal pad.
5. Inserting in the direction of the arrow,the end with the hook goes slowly slide into the shell first. When you hear a bang, it means that it is locked
Note:
１.After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on both Mac and Windows OS, please format it to EXFAT.
２. Pless kindly noted our item work well on all brands M.2 NVME PCIe and SATA NGFF 2242, 2260, 2280mm SSD up to 4TB including Intel 600p, 660p, Sumsung, WD, Crucial etc. If any question you have, please mail us support at ssk point cn,we will help you well.
３.Not compatible with MacBook original SSD．
Thank you for your notice!
According to the New USB-IF standard, the USB 3.2 specification replaces the USB3.0 USB3.1 specification and it introduced a new nomenclature, the USB 3.2 specification absorbed all prior USB 3.0/3.1 specifications, So, our 10Gbps USB C NVME SSD Enclosure, we can say USB3.1 Gen 2 or USB3.2 Gen 2(Old Nomenclature /New Nomenclature)
USB 3.2 New Nomenclature:
1. USB3.2 Gen 1 = USB3.1 Gen 1 , Product transfer rate is up to 5Gbps, Marketing name: SuperSpeed USB
2. USB3.2 Gen 2 = USB3.1 Gen 2 , Product transfer rate is up to 10Gbps, Marketing name: SuperSpeed USB 10Gbps
3. USB3.2 Gen 2X2, Product transfer rate is up to 20Gbps, Marketing name: SuperSpeed USB 20Gbps
Compatibility
M.2 SATA B Key & (B+M) Key 2280/2260/2242 SSD
M.2 NVMe M Key & (M+B) Key 2280/2260/2242 SSD
M.2 SATA B Key & (B+M) Key 2280/2260/2242 SSD
Compatible with PC & Mac computers & smartphone
Compatible with 2.5 inch SATA HDD and SSD
Compatible with all 2.5 inch and 3.5 inch SATA HDD and SSD
USB Interface
USB 3.1 Gen 1
USB 3.1 Gen 2
USB 3.1 Gen 2
USB3.1 GEN1
USB 3.0
USB 3.0
Transmission Speed
5Gbps
10Gbps
6Gbps
5Gbps
5Gbps
5Gbps
Material
Aluminum
Aluminum
Aluminum
Aluminum+ABS
Aluminum+ABS
PC+ABC
Max HDD Capacity
2TB
4TB
2TB
1TB
4TB
16TB
【Applicable SSD】- SSK M.2 NVME SATA SSD Enclosure is compatible with both SATA and NVME PCIe M Key and B+M connectors SSD in sizes: 2242/2260/2280. it is not compatible with B Key Connectors. It does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Compatible with M.2 NVMe/SATA PCIe M key,PCIe B&M key SSD. Note: NVMe and SATA SSD are not included.
【Aluminum Alloy Shell】- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry; Includes 2 x Thermal Pad，both USB Type-C and USB 3.0 (Type-A) cables.
【Tool-Free Design and Speed】- 100% Tool-Free, quickly install and remove SSDs without any tools. M.2 NVME USB3.1 Gen2 Transfer speed is up to 10Gbps, M.2 SATA USB3.1 Gen 2 is up to 6Gbps. Thunderbolt 3 compatible. One HD movie transfer only takes 2 seconds; Backward compatible with USB3.1 Gen1 and USB3.0 at respective speed limits.Thunderbolt 3 compatible.
【Blue Indicator 】- Blue Indicator shows the data transfer status, easy and clear;SSD file system must be supported on host operating system to be accessible. As with all SSDs, new media must be formatted before use.
【High Quality Master Chip 】- Adopts high performance controller IC Chipset RTL9210B, Complies with UASP, Trim which can effectively improve the speed and extend the lifetime of SSD. Plug-and-play, mo additional drivers required. Bus powered, does not need an external power supply. Compatibile with Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC.
 Key,External Solid State Drive Case Support UASP Trim for 2242/2260/2280){kind=link}