Price: $28.79
(as of Mar 24, 2024 18:17:11 UTC – Details)
Product Description
M.2 SSD Enclosure only for NVMe M/ B&M Key M.2 SSD (PCI-E-based). Applicable to sizes 2230, 2242, 2260, and 2280 solid-state drivers. Data Transmission Up to 10Gbps. High-Quality Master Chip, effectively improve the speed and extend the lifetime of SSDProduct Features:SSD copying (cloning) is possible at the push of a button without using a personal computer.USB3.1 Gen 2 Type-C to M.2 M/ B&M Key NVMe SSD enclosure.Plug & play, hot plug compatible, no driver required.Aluminum alloy material is designed for better dissipation performance.Support for PCI-E-based NVMe SSD.Support M Key NVMe SSD.Support B&M Key NVMe SSD.Supporting data transmission up to 10Gbps.Support TWO M.2 (NVME) hard disks for read-write at the same time.You can use the spare old hard drive to expand the capacity of the new computer.
System Requirements and Compatibility
USB 3.1 Gen 2 is required for 10Gb/s connection speed ( actual drive speed may vary due to media and file system overhead, and potentially thermal throttling for some SSDs )
USB 3.1 Gen 1 or USB 3.0 maximum connection speed 5Gb/s
USB Type-A, USB Type-C, and Thunderbolt 3 compatible
Operating system compatibility: Windows, macOS, and Linux
File systems may be operating system specific preventing the drive
Heat Dissipation and Thermal Throttling
NVMe SSDs generate a great deal of heat.Compact, freestanding design making dissipates heat and exhaust efficiently, aluminum construction protects the drive from overheating and reduces vibration.
Even with these features some SSDs may still enter a reduced performance state as they heat up, especially when under heavy load, this is most common with older NVMe SSDs with less efficient flash storage.
Portable External USB Storage Device
Use USB-A to USB-C cable or USB-C to USB-C cable Connected to a computer .When connected to a computer , it functions as an external SSD case, and can recognize two SSD cards at the same time(Need to connect charger). supporting a single disk 8TB.You can use the spare old hard drive to expand the capacity of the new computer.
Compatible with NVMe M.2 SSDs(2280, 2260, 2242, 2230).
Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices.
Cloning Operating Instructions1. Before cloning, make sure that the clone disk (disk 2) has been backed up. The total capacity of the clone disk (disk 2) is greater than or equal to the original disk (disk 1).2. Plug in the power supply, make sure the USB cable is unplugged and not connected to the USB interface of the PC.3. Check that the indicators (blue) for both disk 1 and disk 2 are on.4. Wait for 30 to 60 seconds, then press the clone switch for 3 to 5 seconds. When all four green lights are on, clone will begin. The corresponding copy percentage of 25%-50%-75%-100% flashes in turn. If the green lights are not on, do not turn off the power. Wait for a while and you can restart the operation again. Because it takes a little bit of time for the product’s software to get ready.5. When the clone is completed, the 4 LED lights will always be on (the lights are off in the previous software version!).6. Clone disk capacity will be greater than the original data disk, the extra disk space needs to go to the disk manager reformat after the cloning, please refer to the previous disk format for specific operations.7.After cloning, clone disk will enter the offline mode and then the disk won’t be identified when the PC is connected with USB cable. Therefore, should select online mode manually: right-click (computer/my computer/this computer) to select management, then select disk.
Note:
1. Only hard disk boxes, SSD hard disks are not included.
2. Only NVMe PCI-E M.2 M/ B&M Key SSD is supported (B-Key M.2 SSD based on SATA and PCI-E M.2 SSD based on AHCI are not supported).
Package Includes:
1 x Dual-Bay M.2 NVMe SSD Enclosure
1 x Power adapter
1 x USB C to USB C data cable
1 x USB C to USB A data cable
1 x User manual
💜【One-Key Offline Nvme Clone 】 Support offline cloning, hard disk enclosure cannot be connected to any device while cloning. The clone can only go from Disk 1 to Disk 2, please make sure that the disk is in the correct location, and the target disk has a larger capacity than the original disk. Cloning is one-to-one clone of the whole disk, and it will not intelligently identify the data in the hard disk, so please back up the data on the target disk before cloning to avoid losing important data
💙【USB 3.1 Gen 2 with Up to 10Gbps Speed 】 With the latest USB 3.1 Gen 2, this M.2 enclosure for adding external data storage to any device, offers faster read/write data speeds up to 10Gbps, supports 2 pcs M.2 (NVME) hard disk reads and writes at the same time.
💚【Tool-Free Installation 】 Bawanfa M.2 Enclosure Nvme allows quick and easy installation of your M.2 NMVe SSDs. Plug and play, no driver needed. Just slide the back cover and open the case, plug your M Key or M+B key M.2 SSD into the slot, fasten with two rubbers included, finally close the cover. Compact and portable for easy carrying while on the go.
【Portable External Storage】USB3.1 GEN 2 hard drive enclosure can easily connect your M.2(NVME) to a PC, laptop for data transfer. (Need to connect the included charger)Supports 2 M.2 (NVME) hard disk reads and writes at the same time.It protects the hard disk from outside scratches and makes M.2 hard drive portable for data storage. Maximize the use of your SSD hard drive again, perfectly protecting what you love and cherish.
💛【Compatibility】M2 SSD Docking Station compatible with M.2 NVMe SSDs.(2230 2242 2260 2280 these four specifications of the hard disk) .Performance depends on host system, workload, and NVMe media used. USB-C Gen 2 or Thunderbolt 3 host recommended for fastest performance. USB-C Gen 1 and USB 3.0 systems supported at up to 5Gbps. Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
