Price: $137.77
(as of May 27,2023 09:03:11 UTC – Details)
Description:
Support two working modes, DATA Read&Write Mode and DATA Clone mode.
1. When connected to a PC/Laptop, the DATA Read&Write Mode will be automatically turned on.(The new hard disk needs to be formatted first)
2. When using the data cloning mode, there is no need to connect this dupulicator to the computer/laptop.
Warm Tips:
1. Do not connect to the computer during use.
2. SSD condition: If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors.
3. Make sure that the two SSD disks can be recognized on the computer when plug in our nvme enclosure.If not, it could not clone.
4. The external hard drive docking station supports all 2242/ 2260/ 2280/22110 PCIe NVMe M.2 SSDs of M-Key, SATA-based B Key & (B+M) Key M.2 SSD, PCIe AHCI SSD or any SSD Does not support from Mac.
5. When the copy is completed, wait 3-5 minutes and then turn off the power and then remove the SSD. The high-speed NVMe M.2 drive will generate a lot of heat when it is working. Do not touch the SSD during operation.
6. For a brand new SSD hard disk, the hard disk may not be found, because the brand new SSD hard disk needs to be formatted before the first use. And also need to partition the SSD drive.
7. To obtain a data transfer rate of 10Gbps, the USB 3.1 interface on your PC should be USB 3.1 Gen 2. Some PCs are only equipped with USB 3.1 Gen1, which has a maximum speed of 5Gbps.
8. After cloning is complete, the target disk will enter offline mode. In offline mode, the disk cannot be recognized when connected to a PC with a USB cable. Therefore, you should manually select the online mode: right-click (Computer/My Computer/This Computer) and select Manage, and then select Disk Management in the pop-up dialog box, you will see a disk in an offline state, and then Right-click on it and choose online mode.
【Easy Operation】docking stations are very easy to use, no need any tools. , no drivers required. Except the SSDs, you do not need to prepare anything else, because the package contains all the accessories you need: two USB3.1 Gen2 data cables (A to C and C to C) and a 5V/3A power adapter.
【Multiple data conversion】Achieving USB data transition from M.2 SSD to M.2 SSD/PC/SD Card/MacBook Transfer between data, Supports DATA Read and Write and Clone, Compatible with Windows/Mac/Linux
【Efficient Heat Dissipation】Stereo solid-state hard disk box offline clone base, fast heat dissipation, better protection of hard disk.
【ONE-KEY OFFLINE CLONE】This dual-slot hard drive enclosure can not only be used as an external NVME SSD to expand your storage capacity, but also can be used for offline backup. No need to connect to a PC, just plug in and press the start button then you can back up your important data. LED indicator can monitor the SSDs’ clone progress at any time. Note: please back up the data on the target disk before cloning to avoid losing important data.
【Plese Note That】This Docking Station only Support M key or B+M key SSD. Does not Supports plug & play and hot swap.The capacity of the target SSD must Large or equal than the original SSD. If use the equal capacity SSD, please make sure there is showing the same capacity on the computer or it won’t be clone sucessfully.
