Price: $16.99
(as of Aug 24, 2023 01:45:09 UTC – Details)
Product Description
PRODUCT INTROCUTION:
This USB 2.0 to IDE / SATA drive adapter implements a bridge between a USB port and one SATA, ATA or ATAPI based mass storage device port.
This usb hard drive adapter could turns any standard IDE or SATA drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives.
The Hi-Speed USB interface provides for easy installation with its Plug and Play design. The ide to usb adapter supports all existing IDE/ATAPI devices such as a CD-ROM, CD-RW, DVD-ROM and 2.5 and 3.5 IDE and SATA hard drives.
DEVICE INSTALLATION:
Hardware Install:
1. Comfirm device is under master mode.
2. Connect SATA/IDE connector to SATA/IDE device.
3. Connect AC power to SATA/IDE device.
4. Connect cable to USB port of computer.
Driver Install:
1. Window98: Insert Driver CD to CDROM and run X:win98setup.exe before you insert the cable to your computer.
2. Windows2000/me/XP: You don’t need to install any driver.
3. Mac 8.6 or higher: Copy Fene USB SATA/IDE_05E3_0702. sit to desk to desk to pand double click it to get driver file. Then copy the driver file to [System Folder][Extensions]. After that, connect cable to computer and reboot the system.
PRODUCT FEATURE:
* Connect to the IDE device using USB interface and SATA device too
* USB 2.0 standard, Full speed, 480M bps full speed
* Transfer rate up to 480MBps (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver
* USB 1.1 device interface can be use, (Backward compatible to USB 1.1)
* Complies with ATA/ATAPI-66 Specification 1.0
* Easy to use and plug & play
* Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.)
* External power adapter included, for power up the 12V IDE/ATAPI devices Usage
NOTE: The power supply and switch are only for 12V devices. 5V devices don’t need to plug the power supply, so if you connect the power supply when using the 5V devices, the power switch will NOT work!
* For easy connect to the IDE device / SATA device and make the hard disk device more portable
PRODUCT SPECIFICATION:
Components:
1. USB to SATA/IDE cable: used to connect SATA/IDE device to computer with USB port.
2. Power with 12V channel output: used to supply power to SATA/IDE device.
Package Include:
1. USB to IDE/SATA cable
2. SATA Cable/SATA Power Connector
3. Power adapter(AC110V-240V)
4. Power cord
5. CD Driver
◆ USB 2.0 to 2.5″ 3.5″ IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage.
◆Use your 2.5″ / 3.5″ IDE hard drive or SATA hard disc as an external hard drive. Connect your ide to usb adapter to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver.
◆ Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed.
◆ AGPtEK sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable.
◆ This usb sata ide adapter is easy to use and plug & play, no drivers needed.
