Price: $14.99
(as of May 25,2023 02:06:08 UTC – Details)
Product Description
The package contains:
1 x M.2 (NGFF) chassis
1 x USB3.0 cable
1 x screwdriver
2 x screws
M.2 SATA SSD to USB 3.0
Size:87mm*42mm*8.5mm Support M.2 SATA SSD:2242/2260/2280mm Theoretical transmission speed: 6GBPS GEN2 version of the VL716 controller chip Aluminum alloy shell, shockproof, good heat dissipation
Does not support NVME SSD, does not support PCIE SSD, Does not support MSATA SSD, just support SATA based SSD.For the brand new SSD drive, it may can not find the drive, because the brand new SSD drive should be formated before first time using. And also need to make the ssd drive partition.Follow step is to find the brand new ssd drive:1. use your mouse right key to click “Computer”, it will show a drop-down menu2. use your mouse left key to click “Computer Managment”,3. use your mouse left key to click “Disk Managment”After find the brand new ssd drive, please format it, and made partition. Then you can find the drive normally.
One
Open the case from the side without USB-C port
Two
Connect the Type-C cable to push the PCB board out.
Three
Insert your SSD
Four
Lock your SSD
Fives
Insert the PCB board to the case
Six
Lock the case by screw
SATA
✓
✓
✓
✓
X
NVME
X
X
X
X
✓
Interface Type
MICRO-B
Type-c
Type-c
MICRO-B
Type-c
Interface M.2
✓
✓
✓
✓
✓
Compatible size
2230/2240
2230/2240
2230/2242/2260/2280
2230/2242/2260/2280
2230/2242/2260/2280
Transfer speed
5GBPS
10GBPS
10GBPS
5GBPS
10GBPS
Dose not support the NVMe SSD,only support the M.2 22×42mm/60mm/80mm SATA SSD
Aluminum chassis is durable yet sleek, screw locked design ensures steady hard drive insertion.
Inteface: NGFF(inside, not support NVME),USB3.0(outside). Transfer Speed up to 6Gbps.
Compatible For Windows XP / Vista / 7 / 8 /8.1/10 and Mac OS 10.1 and above.
It is just an exernal hard drive enclosure case for M.2 SSD, and SSD isn’t included