Frienda 10 Pieces 0.91 Inch OLED Display Module Driver IIC I2C Serial Self-Luminous Display Board Compatible with Arduino Raspberry PI

51m1yRHDR7L. AC41EtLSfbsDL. AC41dqv0FHSVL. AC41VwrE+1M6L. AC
Price: $23.99 - $21.99
(as of Apr 01,2022 07:49:19 UTC – Details)


Applicable for head-mounted displays, MP3, MP4, watch, meters and other intelligent instruments.
The OLED display module is self-luminous, which means OLED display is higher compared to that of LCD display in a dark environment.
Featuring an easy switch-cap charge pump that turns 5V into a low voltage drive for the OLEDs, which makes the module the easiest ways to bring OLED into a project.

Display size: 0.91 inch
Whole size: approx. 38 x 12 x 3.6 mm/ 1.5 x 0.47 x 0.14 inch of each
Display: as pictures show
High resolution: 128 x 32
Voltage: 3.3V – 5V DC
Viewing angle: more than 160 degrees
Working Temperature: – 30 ~ 70 degrees Celsius
Screen material: glass, need good protection
I2C Interface:
GND: ground
VCC: 3.3V – 5V
SCL: I2C serial clock (A5. MEGA: 21)
SDA: I2C serial data (A4. MEGA: 20)

Package includes:
10 x OLED Display modules in 0.91 inches 128 x 32

The mention of brand names and any related models above is only for purposes of demonstrating compatibility, not for brand use, our brand is Frienda.
Wide compatibility: this 0.91 inch OLED module is designed to display graphic information and text information directly on your microcontroller project; Compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc.
Production details: resolution is 128 x 32; View angle is more than 160 degrees; Supporting voltage is from 3.3V to 5V DC; Power consumption during normal operation is 0.04W, full screen lit is 0.08W; Whole size: approx. 38 x 12 x 3.6 mm/ 1.5 x 0.47 x 0.14 inch of each
Practical self-luminous design: the OLED display module is self-luminous, so that no backlight is required; It features high contrast, bright and crisp dots, which is convenient for you to read tiny fonts
Driver and communication: Communication is IIC/ I2C interface, only needs 2 I/O ports; Compatible with MMDVM, Pi-Star, and compatible with Raspberry pi
Produce fonts: there are no fonts embedded in the OLED controller, so users can use the font generation software to create the fonts